Right, a bit more work on the old gearbox mounts and its free. I have now had the chance to test fit the lot (gearbox etc).
Its very close, but I will need more length in the frame.
I can do 3 things, 1) stretch the frame to acomodate the length 2) add extensions to the front of the frame to clear the startermotor/flywheel 3) create a new lower basket/subframe to support the engine.
I havent decided which I will do, It depends on what tools are available and what can be obtained. I also test fitted the pulley, it should be doable but the gearbox will need to move closer to the front of the bike so that it clears the swing arm bearings. Hmmm. Have a look below:
1,036 total views, 1 views today